Blue Gee Polyester Catalyst - 8 Grm

Product Code: 100296
Alternative Image
Blue Gee Polyester Catalyst - 8 GrmAlternative Image 1
Price: £4.99
Qty: Out of Stock
Email Me When Back In Stock

Gelcoat Catalyst for the Laser®.

NOTE : Gelcoat and Catalyst can only be shipped to the UK and mainland Europe regions.

Mix Ratio: 2% catalyst for use with the Rooster Gel coat.

Use 6 drops into 10ml of resin. (As a guide 1 UK tablespoon = 14.2ml)

Curing: At 15C pot life is approx 15 mins, repair cure 1-3 hours

At higher temps, cure times will be reduced and colder, will be slower. Never work on surfaces colder that 5C

Do not allow the resin or catalyst to freeze.

Preparation: All surfaces must be clean and dry, free from loose material. Roughen area thoroughly and degrease with pure acetone.

Wear protective clothing, and keep all work warm and dry.

Always read the product labels.

Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser Performance (Europe) Limited. Rooster Sailing Limited is fully independent of both Laser Performance (Europe) Limited and Velum Limited.

There are currently no FAQs for this product. If you require more information please feel free to Contact Us or browse our online Hints & Tips.

Product Reviews

Please leave a review

This product has not been reviewed yet. If you would like to add a review simply click the 'Write A Review' button above.