My Basket (0) £0.00

You have no items in your Shopping Basket.

Find A Stockist Call us now on +44 (0)1243 389 997
  1. Home
  2. Shop By Boat
  3. Laser 1
  4. Laser 1 Spars
  5. RWO R4340 Kicker Tang - for a Laser

RWO R4340 Kicker Tang - for a Laser

Product Code: 100641
Alternative Image
Price: £11.35 RRP: £12.61 Save: £1.26
Qty: In Stock
Add to Basket

Official Kicker Tang suitable for the following rigs.

  • Laser® Standard
  • Laser® Radial
  • Laser® 4.7

Please note: If used with the Laser bottom spar section, the hole size of the kicker take off hole for this RWO fitting is ~5.4mm diameter. The Laser class rules allow drilling out the hole in the tang is needed. "The mast tang hole may be drilled to take a larger pin.” The HARKEN 31026A is a 6.35mm (1/4") pin. See HERE for the pin details.


Official parts for the Laser® are ´as supplied´ by the Laser Centre and are fully class compliant. They have to be used if you are sailing at an association event.

Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser Performance (Europe) Limited. Rooster Sailing Limited is fully independent of both Laser Performance (Europe) Limited and Velum Limited.


There are currently no FAQs for this product. If you require more information please feel free to Contact Us or browse our online Hints & Tips.

Product Reviews

Please leave a review

This product has not been reviewed yet. If you would like to add a review simply click the 'Write A Review' button above.