Free delivery over £45 / Next Day Delivery Available if ordered before 3pm GMT

Select store

Your Basket

Your your basket is currently empty

Taxes and shipping calculated at checkout Checkout

Kit Guide

Blog articles on recommendations and suggestions on purchasing and using the Rooster water sports kit.

The Rooster 8.1 Class - Tuning Guide

By Rooster Sailing 2nd October 2020

Tuning Guide By Steve Cockerill With the possibility of sailors well in excess of 90kg sailing the Rooster 8.1, we have built in a large amount of luff curve the sail to support the leach – even when the mast is bending sideways under the full hiking load of the sailor. This means that the rig has to be set up differently to the Laser® Standard Rig sail that perhaps you may be more used to. If you were to merely use the equivalent vang (kicker) tensions of Laser® Standard Rig sail you would immediately notice, on an off-wind leg,...

Maintain and Repair your Topper Bailer

BAILERS – Maintain and Repair, prior to you first event! The Super Shute 60 bailer (pic 1) is expensive and...

By Dave Cockerill 2nd October 2020

Topper Mast Cup Assembly

To remove an old cup: Remove the mast gate for easier access. Remove the nut and washer from the top...

By Dave Cockerill 2nd October 2020

Your New Rooster Trailer - Loading tips, User Guide & Care.

Once you have taken delivery of your new Rooster road trailer, below you will find some useful information about setting up...

By Mark Harper 18th January 2022

Guest Blog: Bimbling the RS100, by Clive Eplett

About the time the RS100 was announced, I was chatting to supercrew and ex-colleague Roz McGrane. “I quite fancy one...

By Rooster Sailing 2nd October 2020