Custom Rigging - Replacement Shrouds for Albacore (Pair)

A pair of shrouds for the Albacore dinghy class (3mm dia. T terminal to swaged OR hard eye using 1x19 wire). Suitable for the Selden & Super Spars range of Albacore masts.

Measurement of Shrouds

Rooster use a Bearing Surface (BS) to Bearing Surface (BS) length measurement.  On the Albacore shroud this is from the lower swaged (or hard eye) eye to the T terminal, and a length of (a guide only) approx. 4000mm. (See diagram and note below).

The Albacore has a number of systems to adjust the rig tension e.g. levers,quadrant adjusters, cascade systems, block and tackle systems etc.

The end terminal on the shroud can either be a swaged eye or a hard eye. Please input your full requirements using the input box above, along with the LENGTH required. Albacore rigs will vary and each one is custom made to order.

NOTE: For Albacore Super Spars masts only the shrouds come complete pre fitted with a pair of spreader end adjusters.

Please input your Bearing surface to Bearing surface length measurement and end terminal required.

A typical layout of an Albacore dinghy adjustable rig

Please note this item is classified as a CUSTOM PRODUCT and hence customers should be aware of the returns policy as found in the current Rooster Terms and Conditions.

Learn more about caring for your gear on our product care page here