Selden B085-0585 Hornet Boom 2633

SKU:
147001

£328.23

£328.23 ~~£345.50~~

Save £17.27

Sold out

Tax included.

Product variants

Quantity

Pre-order Today - Receive within 7 days
Inventory on the way

Out of stock

%3Cp%3EEarn%20[points_amount]%20points%20when%20you%20buy%20this%20item.%20Points%20are%20calculated%20before%20discounts%20are%20applied.%3C/p%3E

If currently in stock:

Supersaver Delivery receive by: Jul 01 - Jul 05
Order before 3pm (GMT) for Next Day Delivery

Product Video

The Hornet Alloy 2633 section boom, has an unrivalled stiffness to weight ratio, allowing maximum performance through kicker and mainsheet control, together with minimum excess weight. The section is optimised for high resistance against vertical bending and come with an integral sail track and lower in-boom track for mainsheet and kicking strap attachments.

The outer end of this boom has a cut away taper approx. 34cm long. The boom is compliant with the current National Hornet Class rules.

The boom is supplied with inboard and outboard ends with sheaves, plus two boom slides which allow direct attachment of the mainsheet blocks (Not supplied).

A small plastic boom deck protector fitting PN 511-804 is attached - See HERE for more details of this part. Also supplied with this boom is a Selden 511-664-12 kicker take off block fitting - See HERE for more details of this block.

Selden 2633 Boom Properties

Section weight kg/m	1.06
Dimension fore/aft mm	85 mm
Dimension athwart mm	66 mm
Stiffness fore/aft cm4	40
Stiffness athwart cm4	18
Class	Hornet

The 2633 Boom Section

Please note: Collection from the UK Rooster Office or delivery to a UK (mainland only) address only due to the length.

About this product

The Hornet Alloy 2633 section boom, has an unrivalled stiffness to weight ratio, allowing maximum performance through kicker and mainsheet control, together with minimum excess weight. The section is optimised for high resistance against vertical bending and come with an integral sail track and lower in-boom track for mainsheet and kicking strap attachments.

The outer end of this boom has a cut away taper approx. 34cm long. The boom is compliant with the current National Hornet Class rules.

The boom is supplied with inboard and outboard ends with sheaves, plus two boom slides which allow direct attachment of the mainsheet blocks (Not supplied).

A small plastic boom deck protector fitting PN 511-804 is attached - See HERE for more details of this part. Also supplied with this boom is a Selden 511-664-12 kicker take off block fitting - See HERE for more details of this block.