This is for a pair of RS 700 lowers 3mm dia. 1x19 stainless steel wires. The end fittings are a 'T' terminal and a 1/4" UNF swaged screw stud with a LEFT tighten thread - Rooster will use the plain Blue Wave stud fitting - which is a longer thread then a typical screw stud, to give you more adjustment range. - this screw stud end fitting is to connected to a Blue Wave rigging screw. (Not supplied).

A typical 1/4" UNF Blue Wave rigging turnbuckle screw is shown below: (Not supplied).

Please input the required length of the wire you require, measured from the 'T' terminal bearing surface to the end of the screw stud.

NOTE: The default for the Bluewave fitting is to supply a LEFT tighten thread stud.

Please note this item is classified as a CUSTOM PRODUCT and hence customers should be aware of the returns policy as found in the current Rooster Terms and Conditions.