WE SHIP WORLDWIDE & UK Mainland SPEND OVER £30 AND GET FREE DELIVERY (UK MAINLAND ONLY)

Your Basket

Your your basket is currently empty

Subtotal
£
Taxes and shipping calculated at checkout Checkout
Topper C18 Self Bailer (Super Shute 60)

Topper C18 Self Bailer (Super Shute 60)

SKU: 127453
Rated 3.0 out of 5
Based on 1 review
£63.17
In StockLow StockOut Of Stock
£63.17
£63.17 Available in 5-7 Days
Topper® Self Bailer. You will find a guide on the Rooster Blog on how to maintain & repair your Topper bailer HERE Please NOTE: This bailer comes complete with a pack (6 no.) of Generic s/s cwk bolts and plain nuts. These bolts and nuts cannot be used with the... Read more

Description

Topper® Self Bailer.

You will find a guide on the Rooster Blog on how to maintain & repair your Topper bailer HERE

Please NOTE: This bailer comes complete with a pack (6 no.) of Generic s/s cwk bolts and plain nuts. These bolts and nuts cannot be used with the Topper hull. Topper owners who wish to replace their existing Topper bailer nuts and bolts with new nyloc nuts and bolts, should use 6 no. Rooster product code 127464. These nuts and bolts are designed for the Topper hull.

Note: The 127464 is for a single bolt and nut.

(Seperate nyloc nuts M5 are Rooster product code 130670 )


Topper® is a registered trademark of Ian Proctor Designs Limited.

Delivery & Returns

You can select your preferred delivery option or local pick up from Rooster at checkout.

We are happy to accept your returns so long as you send them back within 90 days.

UK Mainland returns can be sent back to us free of charge by clicking here from all other locations please click here

For full details on all our terms and conditions click here.

Thank you for being a customer of Rooster, if you have any questions please use our online chat, call or email.

Email: sales@roostersailing.com

Phone: +44 (0)1243 389997

Reviews

average rating 3.0 out of 5
Based on 1 review
  • 5 Stars
    0 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    1 Review
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
0% of reviewers would recommend this product to a friend
1 Review
Reviewed by Paul B.
Verified Buyer
I don't recommend this product
Rated 3 out of 5
Review posted

OK product, works ok but has its shortfalls

I bought this to replace the one fitted to my daughter's Topper. It has been mass produced to fit into a hull that has a thickness of 9.5mm. Sadly, the two skins that make up the hull of the topper are closer to 11mm so by the time you add even the thinnest of the supplied gaskets (1mm) the bailer face sits approximately 2.5mm under the outer face of the hull. I ended up fitting it using silicon sealant rather than a gasket to reduce the difference. Not very well thought out it my opinion. It is supplied with countersunk screws too which are different from the dome heads on the Topper. They are too short.

Overall, It is expensive for what it is and not great.

Loading...
Was this helpful?