Selden original sail feeder stainless steel for alloy and carbon masts. (Single sided)
This fits onto one side off the bolt rope track, and helps feed the sail into the track.
This can be retro fitted onto most Selden masts.
It is complete with 2 no. fixing monel metal pop rivets.
The fitting has the following dimensions:
Fitting Properties
| Length of pin |
32 mm |
| Centre of 5mm pin to holes centre |
16.5 mm |
| Flat plate dimensions |
L25.1 x W19.7 mm |
| Holes centres to edge |
6.4 mm |
| 2 no. Rivets supplied |
4.8 mm (3/16") |
| Vertical hole centres |
12.7 mm |
| 2 no. holes |
5 mm dia. |